Articles About simulation software
Articles are sorted by RELEVANCE. Sort by Date.
FVA Software bundles the results and knowledge from hundreds of research projects in one platform.
After decades of iteration, you might think manufacturing software suites are running out of new modules to add, but improving hardware is opening up new avenues for them to explore.
Durability requirements must be balanced with the need for lightweight and low-cost solutions which meet noise and vibration targets whilst also exhibiting excellent efficiency.
While some organizations focus on real-world analytics and data collection for predictive maintenance, simulation tools and virtual prototyping can be another solution for motor efficiency.
Collaboration moves bearing modeling and simulation software forward
In the design of an automatic transmission gearbox, the variation of one parameter can result in different system performances due to the strong interdependencies among all components. For given transmission ratios, component lifetimes and safeties, or space restrictions, improvements in efficiency, noise, and weight can be achieved.
Modeling and simulation is a key driver of innovation. Whether itâ™s general manufacturing, consumer goods or life sciences, the ability to realistically model and simulate the response of parts, sub-systems and complete assemblies to increase accuracy and repeatability is vital in todayâ™s analytical world.
Software Design, Analysis and Calculation Tools Help Solve Today's Engineering Challenges
The latest updates in software for bearing design.
Is there a gear software package out there that will calculate the design of spur, helical, worm, and planetary gearsets? Also, we would like a program that calculates stresses and material selection. Finally, we would like to have the program calculate bearings loads, too. Thank you for your help.
This paper provides a mathematical framework and its implementation for calculating the tooth geometry of arbitrary gear types, based on the basic law of gear kinematics. The rack or gear geometry can be generated in two different ways: by calculating the conjugate geometry and the line of contact of a gear to the given geometric shape of a known geometry (e.g., a cutting hob), or by prescribing the surface of action of two gears in contact and calculating the correspondent flank shapes.
Implementing product lifecycle management strategies can be intimidating at first glance, but it's also necessary. Here's why and how you should implement a PLM strategy of your own.
In a research project at the Vienna University of Technology, the KISSsoft design software was used to check a new drivetrain concept and the micro-geometry of the bevel gear stage for a UAV (unmanned aerial vehicle).
As NVH technology advances, so do the tools that allow engineers to study, test, and manufacture bearings capable of delivering high-performance and quality.
Cutting-Edge gearbox design software.
Win-911 Examines Critical Role of Remote Alarm Notification Software
A discussion of the evolution of condition monitoring for bearings and the upcoming introduction of company's next-generation condition monitoring platform.
In recent years the estimation of gearbox power loss is attracting more interest â” especially in the wind turbine and automotive gearbox industry â” but also in industrial gearboxes where heat dissipation is a consideration as well. As new transmissions concepts are being researched to meet both ecological and commercial demands, a quick and reliable estimation of overall efficiency becomes inevitable in designing the optimal gearbox.
The integration of manufacturing information into gear design software reduces cost during the design process by avoiding time-consuming back and forth between the design and manufacturing departments. The challenging task for such software is ensuring the design engineer does not need specific manufacturing expertise. Otherwise he or she would be overwhelmed and not use such a feature.
FVA Offers FE Shaft Calculations in the FVA-Workbench
Finite Element Analysis (FEA) software can be used for a variety of mechanical engineering tasks, including injection molding simulation of plastic parts, analysis of aerospace components, impact and crash analysis of automobiles and the electromagnetic analysis of motors, actuators, transformers and sensors.
In this paper, the models for different power loss sources in transmissions from literature are applied and compared, which form the two methods - ISO 14179-2 and the joint model to estimate the power losses in a transmission. A 2-speed transmission in an electric vehicle is used as a case study to compare the two methods and validate them with experimental data.
This article describes how more sophisticated modeling techniques allow the latest software to identify design issues with bearings, shafts, gears and complicated multi-body systems.
In this study, a finite volume CFD simulation model of a single-stage injection-lubricated test gearbox was applied to investigate its oil flow and no-load power loss. The results provide physically plausible information on the oil supply and its distribution.
With the increasing mechanical power capacity of gearboxes, the thermal power limit tends to become the limiting factor. To achieve a balanced system, the gear unit needs extra cooling. Using a fan that is mounted to a fast rotating shaft is a common solution. For this solution an optimal design is investigated.
Gearboxes are important assemblies within mechatronic systems. During the design phase of such systems it is essential to know the gearbox behavior under consideration of dynamic interactions with its environment. Holistic system simulation helps the engineer to understand this and to improve, adjust, or optimize gearboxes and their application.
Green technology is more than changing a couple of light bulbs or reducing waste. In 2009, the concept is relevant in every facet of manufacturing as companies make a greater push towards energy efficiency and sustainability. In the power transmission and motion control fields, this technology has been integrated into the daily routine, both as an environmentally friendly business venture and a way to offer green products to customers. Itâ™s apparent that the revitalization of manufacturing, both here and abroad, will center on energy technology.
In order for a company to be as efficient as possible, production, inventory and distribution components must be a top priority. A focused supply chain that gets the right materials to the right places in the allotted time frame encourages repeat business. These are concepts somewhat overlooked by many business executives in todayâ™s economy.
When it comes to gear design software, the learning curve never ends. The leading vendors offer various training programs to keep their users well-informed.
When software goes bad, what do we call it? System failure? Human failure? A virus? A number of words will work. How about this? Glitch. It has that onomatopoeic quality that fairly screams, Downtime! And with good reason -- software-generated miscalculations can have very expensive -- if not perilous -- repercussions.
Itâ™s as true in pulp and paper as it is in many other industries: the continued rise in energy prices has put a squeeze on margin and profits. Papermakers know that to maintain margin, they must effectively manage their energy costs.
Based on simulation methods and calculation tools developed by the Schaeffler Group and presented in the first part of this paper, three approaches regarding increased efficiency based on rolling bearings are presented.
Robotics and other advanced automation technology systems are viewed as a looming threat to some in the plant maintenance field. Although there is a constant battle for some workers to remain useful while machines are continuously fulfilling more roles on the plant floor, there are those who in turn have found a better use of their newly freed time.
A reader asks what are the required parameters to properly specify a gear.
News Items About simulation software
1 SKF Simulation Software Gives Engineering Tool to Customer Base (December 20, 2017)
SKF SimPro Expert is an advanced simulation software tool developed in-house by SKF to maximize support for, and co-operation with, its c...
2 KUKA Robotics Launches Latest Digital Simulation Software Package (September 20, 2021)
KUKA Robotics has launched KUKA.Sim 4.0, a major enhancement of its modular digital simulation software package. This latest version faci...
3 Flomerics Offers FloXpress Simulation Software (January 14, 2008)
Flomerics Inc. recently announced that its FloXpress simulation software will be available free of charge to all SolidWorks 2008 users. F...
4 ABI Research Names Siemens a Leader in Manufacturing Simulation Software (February 27, 2020)
Industry experts at ABI Research, a global tech market advisory firm, recently named Siemens a leader in manufacturing simulation softwar...