Articles About medical

Articles are sorted by RELEVANCE. Sort by Date.

1 Bringing Nadcap to the Medical Industry (June 2016)

The medical device industry today has numerous standards and regulations to follow, most notable amongst them being ISO 9001 and ISO 13485. However, these requirements have a shared blind spot: critical processes (heat treating, sterilization, etc.). In the medical industry, all of the standards and audits suppliers need to adhere to focus on general system quality. If the critical processes aren’t being looked at equipment can still fail because of poor craftsmanship.

2 Medical Motion Control (August 2013)

Controls from Quicksilver help in the design and development of medical rehabilitation equipment originally designed for returning astronauts.

3 Design of Plastic Microgear Teeth for Mass Production with High Manufacturing Tolerances for a Medical Device (March 2018)

Microgears for some types of medical technology need to be inexpensively mass produced. But at the same time, they need to be both precise and reliable, even though their design lifetime is relatively short. Here's how microgears were developed for blood glucose measuring devices, insulin pumps for diabetics and other very small devices.

4 Diagnosing the Health of Medical Motors (March 2015)

John Morehead, national sales manager of Crouzet Motors (Vista, CA), was bunkered down in his office in Palatine, IL surrounded at all points by ankle-deep snow from an unfortunately terrible Chicago’s winter night.

5 Medical Pumps with Uncommon Sens(ors) (December 2010)

New generation sensors are improving our quality of life.

6 Medical Modifications (December 2010)

Maxon upgrades tissue removal system for Interlace.

7 Controlling Backlash in Mammography Systems (April 2017)

Medical imaging equipment, water handling systems, conveyors, robotic systems and rotary and linear actuators are among the many devices that may be fitted with electric friction brakes to hold their loads in place when the power is off or disrupted.

8 MedAccred Rising to Ubiquity (March 2018)

MedAccred is emulating the Nadcap standard that came before it, and much like its predecessor, is on a sure rise to prominence.

9 Devising New Devices (March 2017)

Medical Device Industry Continues to Grow and Innovate

10 The Test Run (March 2016)

Modeling and simulation is a key driver of innovation. Whether it’s general manufacturing, consumer goods or life sciences, the ability to realistically model and simulate the response of parts, sub-systems and complete assemblies to increase accuracy and repeatability is vital in today’s analytical world.

11 Gear- or Actuator-Driven, These Bots Are Cutting-Edge (October 2008)

Robots are everywhere these days— bots in the factory, bots in space, bots at the airport, bots in the movies and much, much more. But robots in the operating room?

12 Gearbox Innovation Evolves in Step with Expanding Servo Market (September 2018)

Approximately one quarter of all servo motors around the world require some type of gear reduction in their applications. From large satellite dishes to precision medical devices, gearboxes boost torque and reduce speed for servos in order for them to be sized more efficiently. While gearbox fundamentals haven't changed much over the past 20 years, their effectiveness has improved significantly, driven mostly by the need to accommodate advancements in servo technology.

13 Mathematical Modeling for the Design of Spiroid, Helical, Spiral Bevel and Worm Gears (April 2015)

Spiroid and worm gears have superior advantages for hightorque and miniaturization applications. And for this reason they are particularly preferred in aerospace, robotic and medical applications. They are typically manufactured by hobbing technology, a process with a typical overall lead time of 4 to 14 weeks.

14 Brushless PM-Motors Speed Ahead (June 2014)

There are more brushless PM motors being made every day. These brushless PM motors are smaller in size -- i.e., less than 50 watts in power output found in hard-disk drives, CD and DVD players and many portable medical devices. Servo systems with brushless PM motors ranging from 50 watts to 50 kilowatts are now challenging the larger electric motor applications. A few manufacturers have pushed brushless PM motors above 200 kW.

15 Motors and Motion Meet in St. Louis (December 2014)

The motors might be small, but the big-brain technology driving these electrical wonders was on full display at the 2014 Small Motor & Motion Association Fall Technical Conference, convened November 4-6 in St. Louis, MO. SMMA, the manufacturing trade association (120 members strong) that tends to the best interests of the electric motor and motion control industries — including manufacturers, suppliers, users, consultants and universities — played gracious host to a wide array of presenters from an equally diverse range of sources — from academia to the federal government. Like gears, motors are most everywhere, as evidenced by SMMA’s membership (consumer-, public interest-, national defense- and commercial-oriented) demographic which includes: appliance; transportation; medical equipment; office automation and computers; aerospace; and industrial automation. The association’s mission: To “serve as the principal voice of the electric motors and drives industry” and to provide a forum to “develop, collect and disseminate technical and management knowledge.”

News Items About medical

1 ECM Prototypes Motors for Medical Devices (June 23, 2020)
ECM has integrated its printed circuit board (PCB) stator technology within several medical devices. Recently, ECM prototyped motors for ...

2 Maxon Motors Aims for Medical Applications (August 19, 2009)
Maxon, a manufacturer of small, high-quality DC brush and brushless motors, announced key product developments for medical technology ap...

3 Faulhaber Offers Motor Series for Medical Applications (March 2, 2020)
Faulhaber has developed the new 2057…BA family of motors especially for medical applications. In the sensor-free variant, the driv...

4 LM76 Offers Linear Motion Components for Medical Products (March 30, 2020)
In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such ...

5 Auburn Ball Bearing Fulfills Medical Order Request (May 13, 2013)
Long time U.S. thrust bearing manufacturer, Auburn Ball Bearing, received a request from a renowned medical device company to manufacture...

6 Medical Device OEMs Turn to Plastic Bearings (December 2, 2010)
Bearings have evolved over the last century just as medical device technology has. Sintered bronze bushings first appeared in 1930. These...

7 PI Releases Brochure for Medical Applications (August 27, 2010)
Physik Instrumente (PI) recently released a new brochure on piezo ceramic actuators and components for medical applications.These ac...

8 Moog Acquires Medical Device Company (March 8, 2007)
Moog Inc. entered into definitive agreement to acquire Zevek International Inc. for $ 83.8 million. According to the company's pre...

9 White Electronic Designs Introduces Medical CompactFlash Cards (January 29, 2006)
White Electronic Designs Corp. announces the availability of its Medical Series 1 CompactFlash cards. According to the company’s...

10 Zero Max’s Newest Couplings Provide Zero Backlash and High Torsional Stiffness in Medical Actuation Systems (February 6, 2007)
The next generation of ServoClass couplings from Zero-Max have even high torsional stiffness and are the suitable for handling high speed...

11 Igus Offers Components for Medical Robotic System (June 2, 2011)
A team of researchers from the Worcester Polytechnic Institute have developed a teleoperated robot that will greatly improve the way pros...

12 Brushless 8 mm Motor Produced to Rigid Medical Standard (June 15, 2010)
Maxon's brushless DC 8 mm motor offers continuous current up to 0.95 mNm, nominal speed up to 80,000 rpm and a 70 percent efficie...

13 Ruland Introduces Clamp Style Shaft Collars for Medical Equipment (March 16, 2015)
Ruland clamp style shaft collars are manufactured from select materials with fine finishes, high holding power and a precise face to bore...

14 Ruland Shaft Collars for Medical Applications Improve Holding Power (April 16, 2020)
Ruland manufactures shaft collars from carefully specified raw materials with fine finishes, high holding power and precise face to bore ...

15 Siemens Software Saves Time and Money on Medical Prototypes (April 22, 2020)
Vyaire Medical (Vyaire) is a global market leader in the field of health technology. Their portfolio includes respiratory products for th...

16 Portescap Improves Thermal Characteristics for Medical Applications (October 9, 2017)
Portescap introduces its newest surgical motor solution for large bone orthopedic powered hand tools. This new size 12 (31.5 mm diameter)...

17 Micronor Introduces Controller for OEM Industrial and Medical Systems (May 24, 2016)
With its simplistic design and interfaces, the MR380-0 OEM Controller from Micronor provides a low cost, turn-key solution for OEM manufa...

18 Haydon Kerk Offers Micros Screws for Specialized Medical Devices (April 27, 2015)
Haydon Kerk Motion Solutions is now offering its line of micro screws (2mm diameter screws) with customized lead screw nut materials for ...

19 Keyence Robot Installed on Fresenius Medical Care's Dialyser Production Line (August 4, 2015)
Fresenius Medical Care SMAD recently equipped its dialyser production line at its plant at L'Arbresle, France with a robot. &ldq...

20 Ruland Introduces Beam Couplings for Medical Applications (September 2, 2014)
Ruland beam couplings are zero backlash, have high torsional stiffness and accommodate misalignment, making them well suited for encoder,...