energy monitoring

Articles About energy monitoring


Articles are sorted by RELEVANCE. Sort by Date.

1 Energy Management Considerations with Todays Drive Systems (April 2010)

While it is valid to state that energy efficiency is defined as the same level of production being achieved at an overall lower energy cost, it is equally important for today’s machine builders and automation engineers alike to remember that an energy-efficient system can actually translate into higher productivity. This is achievable through a comprehensive approach to energy management.

2 U.S. Wind Power Blowing Hot as New Installations Flourish (October 2017)

A look at recent installations, plus interviews with some wind industry insiders.

3 Renewed Energy (February 2021)

Energy consumption isn't just an issue at home, though. It's one of today's key issues facing individuals, businesses and governments all over the world.

4 How Predictive Maintenance Can Unlock Offshore Wind Growth (February 2021)

A practical guide to adopting digital technology in wind energy applications.

5 Mining for Solutions (September 2016)

Increasing pressure on many fronts is compelling mine operators to thoroughly examine every phase of their operations. Fluctuating demand that whipsaws mineral prices, government-imposed environmental regulations and rising operating costs related to maintenance downtime all pose serious challenges for the mining sector. Add pressure from customers and stakeholders for more sustainable operations as well as union demands for higher wages, and you have a scenario that requires mine operators to exercise every possible option to achieve more efficient operations.

6 Energized (August 2016)

Energy is the worldwide addiction of the human race. We can’t live without it, and no matter how much we try to conserve it, our appetite is insatiable.

7 Motor Management - Best Practices (December 2015)

Energy costs and downtime can be greatly reduced by instituting a motor management plan. Part II of this three-part series specifically addresses the establishment of a motor failure policy and the development of purchasing specifications. Part I addressed the general aspects of a motor management plan, including the first steps of creating a motor inventory and guidelines for motor repair and replacement. Part III will examine motor repair specifications as well as preventive and predictive maintenance.

8 Motor Management Best Practices Part 3 (February 2016)

This three-part series on motor management best practices focuses on the importance of instituting a motor management plan as a necessity in effectively administering the electric motors in a facility. The goal of a motor management plan is to take advantage of opportunities for energy savings and increased productivity using energy efficient, reliable motors such as NEMA Premium efficiency motors, herein referred to as “premium efficiency” motors.

9 Healthcare at Hannover (June 2013)

SKF Insight ups the ante on condition monitoring technology.

10 Analyzing Wind Power (August 2016)

Wind is a form of solar energy. Winds are caused by the uneven heating of the atmosphere by the sun, the irregularities of the earth’s surface, and rotation of the earth. Wind Turbines convert the kinetic energy in wind into mechanical power.

11 Neighborhood Watch - Advancements in Condition Monitoring Equipment (June 2009)

Now more than ever, manufacturing companies are examining what steps need to be taken to ensure improvements to machine reliability by predicting system failures and minimizing downtime.

12 Monitoring Concept Study for Aerospace Power Gearbox Drivetrain (August 2020)

Rolls-Royce is pioneering the UltraFan engine family architecture containing a planetary gearbox in a power range of 15 to 80 megawatts. To increase the efficiency of the UltraFan, a planetary gearbox is introduced between fan and intermediate pressure compressor. This enables running the turbine to rotate faster and allows a reduced fan speed.

13 Schaeffler Readies Launch of End-to-End Wireless Sensor Solution with OPTIME (September 2020)

A discussion of the evolution of condition monitoring for bearings and the upcoming introduction of company's next-generation condition monitoring platform.

14 Comparing Data Sources for Condition Monitoring Suitability (September 2020)

Condition-based maintenance requires detailed state knowledge, often acquired by means of sensors.

15 Just Right Lubrication (October 2019)

Automatic lubrication systems are getting smarter, easier to use and pushing condition monitoring into the future.

16 Monitoring the Health of Plant Machinery (September 2018)

Health monitoring or condition monitoring has been used for many years on machines and in plants where the cost of an outage is high. It allows failures to be anticipated and maintenance or repairs to be scheduled for the least loss of production, as well as avoiding unnecessary periodic maintenance.

17 Acoustic Analysis of Electric Motors in Noisy Industrial Environment (June 2016)

This paper presents a method for the acoustic analysis of electric motors in noisy industrial environments. Acoustic signals were measured via acoustic camera 48-microphone array, which has the capability to localize a sound (or sounds) source and, in turn, separate those sounds from intrusive background noise. These acoustic analysis results are then compared with vibration measurements; vibration monitoring is a well-known and established technique used in condition monitoring, and in this work vibration measurements were used as a reference signal for assessment of the value of the acoustic measurements. Vibration signals were measured by piezoelectric accelerometers. Two induction motor cases were examined — a healthy motor case, and a combination of static eccentricity with soft foot case. As shown, acoustic analysis appears to be a valuable technique for condition monitoring of electric motors — particularly in noisy industrial environments.

18 A Mechanical Healthcare Plan (June 2018)

Motor Operation Gets Big Boost from Smart Technology (Here's How to Take Advantage)

19 Keeping the Lights on - Machine Monitoring Basics (June 2018)

As manufacturers continually search for ways to cut costs and increase ROI, machine monitoring and predictive maintenance (PdM) solutions are an increasingly cost-effective way for plants and factories to help reduce process downtime.

20 Baby Steps in Wind Energy (August 2015)

The Department of Energy estimates that 4 million megawatts of potential power—four times the amount all U.S. power plants combined currently produce—exists in offshore wind energy. Construction of America’s first offshore wind turbines began in July. The wind farm, which is being constructed off the coast of Block Island, RI, will consist of five turbines. Together, they will produce 30 MW.

21 Energy Efficiency, Configurable Solutions Highlight Pack Expo (December 2014)

A wide variety of companies displayed mechanical power transmission and motion control technologies at Pack Expo, held in November in Chicago. The event, which is the largest packaging and processing trade show in North America, attracted more than 48,000 attendees, according to show owner and producer PMMI. The four-day event included 2,352 exhibiting companies, an increase of more than 19 percent from the previous show in 2012.

22 A Need for Reduced Energy Costs (August 2010)

Options abound for increased efficiency in lubrication.

23 Energy Efficiency by Using Innovative Bearing Solutions (August 2010)

Based on simulation methods and calculation tools developed by the Schaeffler Group and presented in the first part of this paper, three approaches regarding increased efficiency based on rolling bearings are presented.

24 The Limbs of Lumenhaus (October 2010)

Motion systems bring award-winning and energy-optimizing “Smart House” to life.

25 Energy Strategy Makes a Difference (June 2010)

How to optimize performance and sustainable production through strategic planning, informed analysis and automation and control technology.

26 AGMA in Full Support of Energy Initiative (February 2010)

Our politicians in Washington continue dithering over the Obama administration energy bill aimed at developing alternative, green sources of energy production. As a result, when this country will have a viable energy program in place is anyone’s guess, given the usual D.C. gridlock. And yet, Americans can take more than cold comfort in the fact that at least some government agencies—U.S. Department of Energy (DOE)—and the private sector—some major manufacturers—are doing more than their share of work in trying to harness our existing, fossil-based energy sources in such a way that they are used to their best efficiencies.

27 Going Green 101 (February 2009)

Perhaps you don’t need convincing that sustainability is the wave of the future. But where to start? Resources of all types—from websites to trade shows to white papers—are waiting to help green your operation. Most areas are home to regional business alliances devoted to helping local manufacturing outlets contribute in an environmentally sound manner. Here are a few go-to resources for going green.

28 Solar Energy - The Alternative Alternative (October 2009)

While gear and bearing manufacturers engage in a wind energy arms race, the robotic automation industry has its sights set directly on the sun. Solar power—wind energy’s somewhat neglected step brother—has been gaining ground in alternative energy since 2001.

29 The Best-Kept Secret in Green Technology (December 2009)

The Bearing Specialists Association explains the role of bearings in ensuring the efficient operation of machinery.

30 AWEA to Wind Supporters--Do Not Panic (December 2010)

Despite posting its slowest quarter since early 2007, AWEA remains optimistic that the wind industry can and will work successfully with the revolving doors in Washington.

31 Motoring Ahead (August 2011)

Synchronous motors controlled by variable speed drives are bringing higher efficiencies to industrial applications.

32 Effective Management Can Reduce Energy Costs Millwide (December 2012)

It’s as true in pulp and paper as it is in many other industries: the continued rise in energy prices has put a squeeze on margin and profits. Papermakers know that to maintain margin, they must effectively manage their energy costs.

33 Solar Power Turns a Corner (April 2014)

According to GTM Research and the Solar Energy Industries Association (SEIA), photovoltaic (PV) installations increased 41 percent from 2012 to 2013. Additionally, 410 MW of concentrated solar power came online in 2013. Solar was the second-largest source of new electricity generating capacity in the United States.

34 Das (Human) Kapital (August 2014)

Columnist Brian Langenberg provides a current outlook update, key findings from a recent energy sector conference, and takes another look at education and employment.

35 Optimizing Drive Systems for Energy Savings (February 2012)

In looking for potential opportunities to reduce energy consumption via the drive system, a number of areas should be considered.

36 The Energy Efficient Agenda (February 2012)

Next time you are strolling across a manufacturing plant, check out the hardware on the ground. Shop floors are nothing but cables plugged into machines, cables plugged into computers, cables plugged into other cables...

37 Often Overlooked, Lubricants Can Help Lower Energy Consumption (December 2011)

It is a simple fact: better lubrication can lead to dramatic energy savings and an improved bottom line. This ought to interest any plant manager who is looking for ways to reduce operating costs, and it is especially significant at a time when stricter government regulations are in direct contradiction to reducing costs. Lubrication reliability is the solution; this article will describe how manufacturing plants can use “lubrication reliability best-practices” to reduce their energy consumption, emissions and operating costs—all at the same time.

38 Free Energy for Sale...Are You Buying (February 2012)

Managing Editor Randy Stott takes a look at what is really stopping us from pursuing energy efficiency in engineering.

39 Wind Turbine Field and Test Rig Testing as Part of the Design Process for Gearboxes (September 2014)

The growth of worldwide energy consumption and emerging industrial markets demands an increase of renewable energy shares. The price pressure coming from coal, oil, nuclear and natural gas energy - combined with enormous worldwide production capacities for components of wind turbines - make wind energy a highly competitive market. The testing and validation of gearboxes within the test rig and the turbine environment attract a strong focus to the needs of the industry. The following contribution sums up the typical process requirements and provides examples for successful system and component verifications based on field measurements.