Articles About Warner Electric
Articles are sorted by RELEVANCE. Sort by Date.
The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.
News about latest Products in the Industry
The complete product news section from the June 2008 issue of Power Transmission Engineering.
The complete product news section from the April 2008 issue of Power Transmission Engineering.
The complete Product News section from the March 2017 issue of Power Transmission Engineering.
A good deal of confusion exists regarding the factors that determine an industrial electric bill. The following information is presented to help sort out the various items on which billing is based, and to offer suggestions on measures to help control and reduce electric utility bills.
This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.
Japan's Electric Aspark Owl Does 0-to-60 MPH in 1.9 Seconds!
The complete Product News section from the March 2019 issue of Power Transmission Engineering.
Modern drivetrains with voltage-source inverters not only offer advantages like, for example, variable speed operation, increased efficiency and higher dynamics, but also an increase in failures caused by induced parasitic currents.
A Conversation with Jeff Hemphill, CTO at Schaeffler Group USA Inc about mechatronic solutions and the electric vehicles of tomorrow.
Slow speed operation of fan systems within the air handling industry is generally performed due to two reasons: a coast down operation is required for hot (induced draft) fans to cool down before shutdown (often by using a turning gear), and operational efficiency improvements can be achieved during non-peak periods by slow speed operation using a VFD. In either case, when these fans are supported by hydrodynamic bearings, it is the oil film thickness developed from the bearing-shaft interaction that limits the minimum speed that can be maintained without causing premature wear and bearing failure. This paper will present a brief overview of lubrication theory and critical design parameters to achieve slow speed operation.
A nose-in-the-tent peek at the booths featuring mechanical motion components.
Increasing pressure on many fronts is compelling mine operators to thoroughly examine every phase of their operations. Fluctuating demand that whipsaws mineral prices, government-imposed environmental regulations and rising operating costs related to maintenance downtime all pose serious challenges for the mining sector. Add pressure from customers and stakeholders for more sustainable operations as well as union demands for higher wages, and you have a scenario that requires mine operators to exercise every possible option to achieve more efficient operations.
The complete Product News section from the April 2019 issue of Power Transmission Engineering.
News about the most recent products to hit the market.
News from around the industry.
Power Transmission component suppliers discuss COVID-19 Threat and how their companies are responding to keep the supply chain connected.
The complete Industry News section from the June 2021 issue of Power Transmission Engineering
Bell's Electrically Distributed Anti-Torque (EDAT) is Bell's latest commercial innovation. The EDAT system is composed of four small fans within a tail rotor shroud in an offset two-by-two pattern.
The complete Product News section from the July 2021 issue of Power Transmission Engineering.
The complete Industry News section from the September 2021 issue of Power Transmission Engineering
The complete Product News section from the October 2021 issue of Power Transmission Engineering.
Motion control systems often combine high power drive signals in close proximity (or even within the same cable) with lower level signals, like encoders. You will often see ferrite beads added around cables; their effectiveness in minimizing noise is greatly affected by how they are deployed. This involves which signals are grouped, what are the drive characteristics, and how shielding and grounding are handled in the system.
There is absolutely no doubt that riding an electric bicycle will not stir up cinematic memories of Marlon Brando (The Wild One) or Steve McQueen (The Great Escape) tearing it up on their hogs. Think more Pee Wee Herman and his Great Adventure.
News about upcomming products
New Opportunities and Technologies Allow AC Motors to Enhance Motion Control Applications.
The complete Industry News section from the April 2020 issue of Power Transmission Engineering.
This special advertising section features Motors manufacturers.
There would have been an incredible lineup of products and technologies in Chicago in the Hannover Messe USA pavilion at IMTS 2020 -- everything from cobots and smart factory automation solutions to digital twins and mechanical power transmission components. Unfortunately, the planet had other ideas this year and we continue to conduct business on laptops, smartphones and Zoom meetings for the foreseeable future.
The complete Industry News section from the September 2019 issue of Power Transmission Engineering.
Heaven help Mr. Deane were he around today. In our non-stop world of transportation & transport technology, for at least the past decade it is without question the electric car that has drawn most of the attention
The complete Product News section from the December 2009 issue of Power Transmission Engineering.
The complete Product News section from the April 2009 issue of Power Transmission Engineering magazine.
motors with premium efficiency counterparts presents businesses with a significant opportunity to reduce operating costs. A comparison between premium and standard efficiency motors from 0.25 to 10 horsepower is conducted; comparisons of full-load efficiencies are shown, and estimated payback periods are calculated. Methods for calculating the yearly kilowatt-hour consumption and yearly cost savings of premium efficiency motors for this horsepower range are also given. The cost advantages of premium efficiency motors are summarized, and relevant examples of real world cost savings are shown.
This paper describes the development of an educational program centered on electric motor and electric vehicle technology at the MIT (Massachusetts Institute of Technology) Edgerton Center.
Suggesting a bicycle is environmentally friendly is stating the obvious. But the Copenhagen Wheel, unveiled at the 2009 COP15 United Nations Climate Conference, is taking green technology and cycling in a new direction.
The complete product news section from the December 2008 issue of Power Transmission Engineering.
The complete product news section from the August 2008 issue of Power Transmission Engineering.
The complete Industry News section from the March 2021 issue of Power Transmission Engineering.
Companies look to fuel economy, energy efficiency and operating costs to improve off-highway applications.
The complete Product News section from the February 2009 issue of Power Transmission Engineering.
The purpose of DC motor protection is to extend a motor's lifespan by protecting it from conditions that can damage the motor's windings--both electrically and mechanically.
Energy-challenged industries--and countries--can benefit from improved motor design and materials.
The complete Product News section from the December 2012 issue of Power Transmission Engineering.
News about new Products in the industry.
The Formula Renault 3.5 is seen as a crucial stepping stone on the way into the premier class, the Formula 1. Ambitious racers do not just bring their talents - they also have highly efficient motors on board to control the throttle of their 530-hp V8 engines.
For Mark Findlay of UK specialist driveline consultancy Drive System Design, reducing gear noise to suit the low noise levels in an electric vehicle cabin has meant throwing away the rule book.
One of the key challenges in the mining industry today is maintaining throughput in the face of ore grade quality that has declined by 40 percent in the last decade.
News from around the industry
The complete Industry News section from the August 2014 issue of Power Transmission Engineering.
The complete Product News section from the August 2014 issue of Power Transmission Engineering
The complete Industry News section from the October 2013 issue of Power Transmission Engineering.
Mounted ball bearings are everywhere in industrial applications. They serve critical roles in keeping a manufacturing operation running smoothly and in ensuring that equipment functions properly and reliably. So why might it be advisable to spend significantly more for a dimensionally comparable bearing from one supplier versus another?
The complete Product News section from the February 2014 issue of Power Transmission Engineering
The complete Product News section from the March 2014 issue of Power Transmission Engineering.
U.S. manufacturers, such as food processors, face an unprecedented competitive environment and must look for ways to be profitable without negatively affecting the quality of finished products.
News Items About Warner Electric
1 Warner Electric Features A-Track Linear Actuators in New Brochure (April 8, 2006)
Warner Electric published a new eight-page, full-color brochure to introduce new A-Track Series Linear Actuators, a four-model series of ...
2 Warner Electric Releases Clutch and Brake Video Series (January 27, 2016)
A series of informative Warner Electric clutch and brake videos has been produced to clearly show proper installation steps, troubleshoot...
3 Warner Electric Offers New Generation of Brakes for Demanding Machining Applications (May 25, 2017)
Warner Electric has built more than 90 years of design and manufacturing experience into its latest Gen4 range of spring operated, electr...
4 Warner Electric Improves Clutch/Brake Modules in New Line (March 17, 2008)
The Gen 2 packaged electromagnetic clutch/brake modules present several enhanced performance and appearance features compared to the orig...