Regal Rexnord Corporation

Articles About Regal Rexnord Corporation


Articles are sorted by RELEVANCE. Sort by Date.

1 Industry News (December 2021)

The complete Industry News section from the December 2021 issue of Power Transmission Engineering.

2 Energy Initiative (February 2022)

The need for smart, sustainable and efficient components

3 Heavy Industry and Smart Technology (February 2019)

Heavy industry. The phrase conjures images of mines and steel mills, of huge caverns underground, of cavern-like factories, of oldline companies operating heavy-duty machines for hightorque work. That's the image of heavy industry. Today, though, there's also another image. It's of an operator walking a steel mill's floor, looking at his smartphone or his tablet.

4 Industry News (February 2022)

The complete Industry News section from the February 2022 issue of Power Transmission Engineering.

5 Product News (March 2020)

The complete Product News section from the March 2020 issue of Power Transmission Engineering.

6 Product News (April 2020)

The complete Product News section from the April 2020 issue of Power Transmission Engineering.

7 Product News (March 2021)

The complete Product News section from the March 2021 issue of Power Transmission Engineering

8 A Little Peace of Mind (June 2020)

Condition Monitoring Technology Evolves for Gear Drives, Gearmotors and Gearboxes. Here's a look at what some leading manufacturers are offering.

9 Industry News (March 2021)

The complete Industry News section from the March 2021 issue of Power Transmission Engineering.

10 Product News (October 2017)

New HMI from Siemens, ITAMCO ramps up additive manufacturing, LM76 introduces new linear bearings, plus other new products from around the industry.

11 Industry News (December 2017)

The complete Industry News section from the December 2017 issue of Power Transmission Engineering.

12 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

13 Product News (March 2017)

The complete Product News section from the March 2017 issue of Power Transmission Engineering.

14 Product News (March 2016)

News about the latest Products

15 Industry News (February 2016)

Latest news from around the Industry

16 Using Couplings to Reduce Downtime (August 2019)

Downtime, downtime, downtime. When it's planned, it's bearable. When it's not, it's not. To maintain machinery, planned downtime is necessary. To fix broken equipment, unplanned downtime is excruciating, especially when your factory is running closer and closer to full capacity.

17 Product News (December 2015)

News about latest products

18 Purchasing Efficiency (September 2018)

You may have noticed a lot of merger and acquisition activity lately in the power transmission industry. What does it mean?

19 Product News (June 2017)

The complete Product News section from the June 2017 issue of Power Transmission Engineering.

20 Industry News (April 2018)

The complete Industry News section from the April 2018 issue of Power Transmission Engineering.

21 Driving Gears 2019 (September 2019)

Efficiency, power-loss reduction and enhanced performance are just a few examples of what the PT community wants from their gears and gear drives in 2019. Some companies are doubling down on service and assembly capabilities while other others are integrating components in an effort to increase flexibility and control.

22 Product News (August 2018)

The latest products from Kluber Lubrication, Joral, Igus, Portescap, Rexnord, Gearing Solutions, Nord, Rheintacho, GWJ Technology and Miki Pulley.

23 Familiar Goals, New Solutions (October 2017)

Gearmotor manufacturers find new ways to push the envelope. (With Sidebar on new alternative to planetary gearboxes)

24 Product News (September 2017)

The complete Product News section from the September 2017 issue of Power Transmission Engineering.

25 Product News (February 2018)

The latest mechanical power transmission products from Nord Drivesystems, Gearing Solutions, Ogura Industrial, Stafford Manufacturing, Rexnord, Portescap, Steinmeyer, Intellidrives, J.W. Winco and Zero-Max.

26 Product News (April 2009)

The complete Product News section from the April 2009 issue of Power Transmission Engineering magazine.

27 Systematic Improvement (March 2019)

With AGVs, a primary bottleneck on productivity is battery life. But when looking at an AGV as a full system, there are plenty of ways this bottleneck can be widened.

28 Linear Bearing CAD Models and More On the Fly (April 2018)

Here's what one supplier is doing to take advantage of the mobile phone in your pocket.

29 Guide to V-Belt Selection and Replacement (June 2017)

V-belts look like relatively benign and simple pieces of equipment. They're basically a glorified rubber band, right? Need a replacement? Just measure the top width and circumference, find another belt with the same dimensions, and slap it on the drive. There's only one problem: that approach is about as wrong as you can get.

30 Insider's Guide to Automate 2019 and Promat (March 2019)

Automate Show Examines the Integration of Robotics, Automation and Machine Vision, while Promat explores the latest in material handling technology.

31 Product News (April 2019)

The complete Product News section from the April 2019 issue of Power Transmission Engineering.

32 Motion Control Trending Topics 2021 (December 2021)

Digital transformation is taking place across industrial manufacturing and is most prominent in areas such as motion control, automation and robotics.

33 Engineering Showcase - Motors (June 2020)

This special advertising section features Motors manufacturers.

34 Navigating the New Normal (April 2020)

Power Transmission component suppliers discuss COVID-19 Threat and how their companies are responding to keep the supply chain connected.

35 Industry News (February 2017)

The complete Industry News section from the February 2017 issue of PTE.

36 Chains and Belts Play to Their Strengths (December 2015)

As with just about everything else in the manufacturing world — and all which that universe entails — it depends. After all, that’s why the art of manufacturing is a process — not a one-system-fits-all discipline. Yes, once that process has been properly designed and correctly implemented for a given manufacturing production need, it may well run like the astest, smoothest cookie-cutter-type operation ever devised.

37 Product News (August 2010)

The complete Product News section from the August 2010 issue of Power Transmission Engineering.

38 Ask the Expert (February 2015)

Questions by readers answered by Experts in the field.

39 Help Wanted (September 2020)

Options available for those looking for safe, online/in-person gear knowledge.

40 Fluid Power Free-for-All (February 2014)

IFPE offers the right balance of technology and education.

41 Wall to Wall Technology (August 2014)

With the addition of Industrial Automation North America (IANA) as well as Motion, Drive & Automation North America(MDA NA), IMTS 2014 has greatly expanded its range of manufacturing technology services. These co-located shows complement the metalworking solutions found at IMTS by bringing in key suppliers from around the world.

42 And the Winner Is (August 2015)

Excellence Awards Competition, sponsored by the Metal Powder Industries Federation, were recently announced at the POWDERMET2015 International Conference on Powder Metallurgy & Particulate Materials. Receiving grand prizes and awards of distinction, the winning parts are examples of PM’s precision, performance, complexity, economy, innovation and sustainability. The winning parts show how customers from around the world are taking advantage of PM’s design advantages.

43 The Future Rests on the River Leine (March 2015)

“[Motion, Drive & Automation] at Hannover Messe is the place where the future is determined.”

44 Dynamic Behavior of Planetary Gears (June 2020)

In planetary gear systems of high power density and high gear ratio, helical gears create undesirable tilting moments on the planet gears; therefore, spur gears are still preferred for planetary gears -- a special challenge with respect to noise. Specifically, the different behavior of planetary gears with sequential and symmetric gear mesh is explained in this paper.

45 Product News (June 2012)

The complete Product News section from the June 2012 issue of Power Transmission Engineering.

46 Industry News (August 2018)

The complete Industry News section from the August 2018 issue of Power Transmission Engineering.

47 Industry News (September 2017)

The complete Industry News section from the September 2017 issue of Power Transmission Engineering.

48 Eats, Drinks and Treats (September 2017)

Process Expo and Pack Expo Highlight the Latest Technology for Food & Beverage Applications.

49 Stable and Streamlined (September 2018)

Gear drives focus on longevity, quality and customization.

50 Industry News (October 2018)

The complete Industry News section from the October 2018 issue of Power Transmission Engineering.

51 Product News (February 2020)

The complete Product News Section from the February 2020 issue of Power Transmission Engineering.

52 Product News (September 2019)

The complete Product News section from the September 2019 issue of Power Transmission Engineering.

53 Pack Expo: The Push to Automation (August 2017)

With Pack Expo Las Vegas around the corner, we took a look at the state of the packaging industry today to see what you can expect at the show. The answer is more automation.

54 Product News (February 2017)

The complete Product News section from the February 2017 issue of Power Transmission Engineering.

55 Product News (April 2015)

Latest Products

56 Product News (December 2009)

The complete Product News section from the December 2009 issue of Power Transmission Engineering.

57 Industry News (Spring 2007)

News from around the Industry

58 Product News (April 2016)

Latest news about upcoming products.

59 Pack Expo 2016 (October 2016)

Pack Expo takes place November 6-9 at McCormick Place in Chicago. With 2,100 exhibitors, it’s the world’s largest most comprehensive processing and packaging trade show in 2016.

60 The Meaning of Life (August 2016)

End users and OEMs frequently specify "lubed-for-life" mounted bearings, thinking the lubed-for-life bearings will deliver the same life — without lubrication — as bearings that currently require periodic lubrication. The truth is it depends on many factors, and only a detailed review of the application and testing will provide a more accurate answer.

61 Dynamic Performance (April 2020)

PTE Examines Gearmotor and Gear Drive Technology

62 Industry News (June 2020)

The complete Industry News section from the June 2020 issue of Power Transmission Engineering.

63 The Quick Fix - Rexnord Solves Bearing Installation and Removal Challenges (June 2012)

At a Midwestern producer of tubular steel products, measures taken to counteract the effects of impact on a quench tank roll made it difficult to remove and replace the conventional pillow block bearings that support the roll’s shaft.

64 A Case for Large-Scale Manufacturing (October 2011)

Big components aim to revive the North American industrial market.

65 Product News (August 2012)

The complete Product News section from the August 2012 issue of Power Transmission Engineering.

66 Motion, Drive and Automation at Hannover Messe 2013 (February 2013)

Power transmission and motion control companies will be on-hand during Hannover Messe 2013 to display the latest technology offerings in key product categories including roller bearings, gears, pumps, motors, transmissions, drive system components, clutches and braking systems.

67 Industry News (December 2013)

The complete Industry News section from the December 2013 issue of Power Transmission Engineering.

68 Product News (December 2013)

The complete Product News section from the December 2013 issue of Power Transmission Engineering.

69 Product Focus: Gears and Gear Drives (February 2011)

In this special news section, the editors of Power Transmission Engineering have gathered the latest product news and information from the gears and gear drives sector.

70 Bearing Lubrication Under Extreme Conditions, Part II (February 2008)

Rolling element or sleeve bearings often are required to operate under extreme conditions. In these instances, it is more important than ever to follow proper lubrication selection and maintenance procedures to maximize effective life and efficient performance.

71 The 2020 Packaging and Processing Experience (October 2020)

Virtual Pack Expo offers reimagined digital platform

72 Product News (October 2020)

The complete Product News section from the October 2020 issue of Power Transmission Engineering.

73 Product News (February 2021)

The complete Product News section from the February 2021 issue of Power Transmission Engineering.

74 Product News (August 2021)

The complete Product News section from the July 2021 issue of Power Transmission Engineering.

75 Product News (August 2013)

The complete Product News section from the August 2013 issue of Power Transmission Engineering

76 PT Extras (August 2013)

Gear Expo coverage, plus a new video from Motion Industries and Rexnord.

77 How to Spec a Mill Gear (February 2014)

This paper outlines the design considerations that go into construction of a drive system in order to explain the importance of specific data, why it is required, and where design freedom is necessary. Apart from loads and speeds, interface dimensions and site specific conditions are also needed. Deciding up front which gear rating practice to select can affect the torque capacity of the drive train by ~15%.

News Items About Regal Rexnord Corporation

1 Regal Rexnord Corporation Expands Range of Product and Digital Solutions (October 5, 2021)
Regal Beloit Corporation has completed the merger with Rexnord Process and Motion Control (PMC) to become Regal Rexnord Corporation. ...