Ogura Industrial

Articles About Ogura Industrial


Articles are sorted by RELEVANCE. Sort by Date.

1 Product News (December 2017)

The complete Product News section from the December 2017 issue of Power Transmission Engineering, featuring the latest from SKF, R+W, Brecoflex, Nexen, Güdel, Renold Gears, Hansford Sensors, Ogura Industrial, Igus, Destaco, Röhm and Iwis.

2 Planning Ahead (April 2019)

Navigating Clutch/Brake Operation in Harsh Environmental Conditions: Chemicals, saltwater, food particles, heat, dust, and electrical corrosion are just a few of the many issues that can cause clutches and brakes to fail prematurely.

3 Product News (February 2018)

The latest mechanical power transmission products from Nord Drivesystems, Gearing Solutions, Ogura Industrial, Stafford Manufacturing, Rexnord, Portescap, Steinmeyer, Intellidrives, J.W. Winco and Zero-Max.

4 Global Industrial Outlook: Oil Slick Cascading Through Sector (December 2015)

Third-quarter earnings are confirming the worst-case scenario, i.e. — not only are energy related end markets in a downturn, but conditions continue to worsen.

5 Global Industrial Outlook: Batten Down the Hatches (February 2016)

Third-quarter earnings confirmed the worst-case scenario — plunging oil prices are whacking almost the entire industrial sector. The theme is hardly new, as the pattern of our headlines has revealed over the past fifteen or so months:

6 Steps Towards Revolution (December 2015)

The revolution goes by many names: machine-to-machine communication, smart manufacturing and the Industrial Internet, to name a few. In Europe, the prevailing term is Industry 4.0. In Germany, where that phrase was coined, the government is putting down €200 million to cultivate a lead in the industry. The McKinsey Global Institute estimates that its potential economic impact will be almost $4 trillion (or more) by 2025. Enthusiastic evangelists will tell you that the Industrial Internet is the most important advance in their industries that they’ve seen in their decades-long careers.

7 Global Industrial Outlook: Slow Growth Ahead; Farm Belt No Help (June 2015)

First quarter results confirmed our view. Capital expenditures are being slashed in the oil sector, the stronger U.S. dollar is enabling Japanese machinery competitors to gain share in the Middle East and Latin America, and lower soft commodity prices translate into a continuing North American decline in demand for farm equipment.

8 Product News (March 2015)

New products within the Industry

9 The Future Rests on the River Leine (March 2015)

“[Motion, Drive & Automation] at Hannover Messe is the place where the future is determined.”

10 Industry News (February 2016)

Latest news from around the Industry

11 Global Industrial Outlook: Kind of Sluggish (August 2015)

We anticipate no substantive improvement in manufacturing activity. Not in the U.S. or internationally. If anything, headwinds may have become slightly more pronounced because a U.S. — Iran “deal” that everybody hates except a) the Iranian government and b) the Obama administration will result in the release of Iranian oil supply back onto the global market. Oil had rallied from about $50 to $60 over the past month (I like round numbers), but has since roundtripped. Expect further, deeper capital spending cuts in the U.S. oil sector to continue affecting demand for large capital equipment.

12 IMTS 2016 Booth Preview (August 2016)

A nose-in-the-tent peek at the booths featuring mechanical motion components.

13 Industry News (December 2018)

The complete Industry News section from the December 2018 issue of Power Transmission Engineering.

14 Using Couplings to Reduce Downtime (August 2019)

Downtime, downtime, downtime. When it's planned, it's bearable. When it's not, it's not. To maintain machinery, planned downtime is necessary. To fix broken equipment, unplanned downtime is excruciating, especially when your factory is running closer and closer to full capacity.

15 Industry News (February 2020)

The complete Industry News section from the February 2020 issue of Power Transmission Engineering.

16 Making the Smart Choice in PT Components (April 2018)

The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.

17 Industry News (June 2017)

The complete Industry News section from the June 2017 issue of Power Transmission Engineering.

18 Product News (February 2015)

News from around the Industry

19 Saving Time with Auto-Tuning Drives (March 2017)

If there are two things that are in tight supply in the industry, it's time and talent. Manufacturers are always pressured to do more faster, and the industry is producing fewer experts to help them do it, so the industry's had to get crafty and find what time-cutting procedures they can.

20 Automate 2017 Highlights Solution Providers and Integrators (March 2017)

Automate 2017 (April 3-6) will showcase the full spectrum of automation technologies and solutions, from traditional industrial applications to cutting edge new technologies.

21 Global Industrial Outlook: Reality Sinks In (March 2016)

Our “Batten Down The Hatches” call proved timely as the market sold off by about (10 percent) before staging a partial recovery

22 Under Pressure (June 2014)

Wichita Clutch helps drive storm simulator at the University of Florida.

23 Product News (October 2012)

The complete Product News section from the October 2012 issue of Power Transmission Engineering.

24 Product News (April 2017)

Clutches and Brakes take center stage in the April 2017 edition of Product News.

25 Product News (April 2019)

The complete Product News section from the April 2019 issue of Power Transmission Engineering.

26 Product News (April 2012)

The complete Product News section from the April 2012 issue of Power Transmission Engineering.

27 Product News (August 2011)

The complete Product News section from the August 2011 issue of Power Transmission Engineering

28 Product News (December 2009)

The complete Product News section from the December 2009 issue of Power Transmission Engineering.

29 Product News (June 2010)

The complete Product News section from the June 2010 issue of Power Transmission Engineering.

30 Product News (August 2010)

The complete Product News section from the August 2010 issue of Power Transmission Engineering.

31 Product NEws (October 2019)

The complete Product News section from the October 2019 issue of Power Transmission Engineering, featuring new technologies from Timken, Applied Motion Products, LM76, Ogura, Portescap, Ruland Manufacturing, and Heidenhain

32 Product News (December 2010)

The complete Product News section from the December 2010 issue of Power Transmission Engineering

33 The Ugly, the Bad and the Good - Global Industrial Outlook - December 2013 PTE (December 2013)

Global economic demand remains solid - even if you couldn't tell by recent third-quarter results and despite all efforts by U.S. politicians of both political parties. Let's go through what happened and what is coming.

34 The CHIEF Issues - Global Industrial Outlook (February 2014)

Global economic activity remains good -- noise about China slowing, notwithstanding -- and despite the ObamaCare debacle, non-Christmas-related consumer spending looks pretty good. Europe is still Europe and China continues to grow 7-8 percent -- even as the government seeks to clamp down on its own shadow banking system. And India remains a mess.

35 Product News (August 2014)

The complete Product News section from the August 2014 issue of Power Transmission Engineering

36 The Efficient Drive System (December 2013)

It's a fact that drive systems wouldn't function properly or efficiently without couplings. They quietly go about their business of transferring motion from one drive element to the next. In the PT market today, couplings have the unique challenge of satisfying a variety of customer needs including tighter tolerances, higher speeds and a more versatile selection process.

37 Product News (December 2013)

The complete Product News section from the December 2013 issue of Power Transmission Engineering.

38 Industry News (June 2011)

The complete Industry News section from the June 2011 issue of Power Transmission Engineering.

39 Product News (December 2011)

The complete Product News section from the December 2011 issue of Power Transmission Engineering.

40 Wall to Wall Technology (August 2014)

With the addition of Industrial Automation North America (IANA) as well as Motion, Drive & Automation North America(MDA NA), IMTS 2014 has greatly expanded its range of manufacturing technology services. These co-located shows complement the metalworking solutions found at IMTS by bringing in key suppliers from around the world.