Mitsubishi Electric
Articles About Mitsubishi Electric
Articles are sorted by RELEVANCE. Sort by Date.
The complete Product News section from the April 2019 issue of Power Transmission Engineering.
2 Product News (February 2009)
The complete Product News section from the February 2009 issue of Power Transmission Engineering.
3 Hannover Messe USA Goes Digital (August 2020)
There would have been an incredible lineup of products and technologies in Chicago in the Hannover Messe USA pavilion at IMTS 2020 -- everything from cobots and smart factory automation solutions to digital twins and mechanical power transmission components. Unfortunately, the planet had other ideas this year and we continue to conduct business on laptops, smartphones and Zoom meetings for the foreseeable future.
The complete Product News section from the October 2021 issue of Power Transmission Engineering.
The complete Product News section from the March 2019 issue of Power Transmission Engineering.
6 Industry News (September 2019)
The complete Industry News section from the September 2019 issue of Power Transmission Engineering.
7 Product News (December 2016)
News about the most recent products to hit the market.
8 Product News (December 2012)
The complete Product News section from the December 2012 issue of Power Transmission Engineering.
9 Product News (February 2014)
The complete Product News section from the February 2014 issue of Power Transmission Engineering
10 IMTS 2016 Booth Preview (August 2016)
A nose-in-the-tent peek at the booths featuring mechanical motion components.
11 Changing Technologies, Changing Perspectives (February 2017)
A Conversation with Jeff Hemphill, CTO at Schaeffler Group USA Inc about mechatronic solutions and the electric vehicles of tomorrow.
12 Lightweight, Highly Efficient Drive System (February 2017)
This paper presents a joint project conducted by Ashwoods Electric Motors and Oerlikon Fairfield that uses planetary drives with an integrated electric motor. Current solutions used in production of off-highway vehicles rely upon large, heavy and inefficient brushed DC or induction motors, coupled to a planetary gearbox. This presents a number of challenges to the vehicle designers such as: limited vehicle range, limited space around the motor/drivetrain, and motor durability. The proposed integrated system utilizes an Oerlikon Fairfield Torque Hub, widely used in off-highway vehicles, and the Ashwoods first-to-market, interior permanent magnet motor. How these products are integrated, i.e. incorporating a brake solution, represents a market-changing product. Using interior permanent magnet (IPM) technology in the motor design means the motor can be up to 70% lighter, 70% smaller and 20% more efficient than traditional motors used in off-highway traction applications.
13 Built for Speed (March 2018)
Japan's Electric Aspark Owl Does 0-to-60 MPH in 1.9 Seconds!
14 Baldor Motor Basics: Factors that Determine Industrial Electric Bills (August 2017)
A good deal of confusion exists regarding the factors that determine an industrial electric bill. The following information is presented to help sort out the various items on which billing is based, and to offer suggestions on measures to help control and reduce electric utility bills.
15 Product News (March 2017)
The complete Product News section from the March 2017 issue of Power Transmission Engineering.
16 Reducing Food Processing Plant Energy Costs (February 2016)
U.S. manufacturers, such as food processors, face an unprecedented competitive environment and must look for ways to be profitable without negatively affecting the quality of finished products.
17 Making the Smart Choice in PT Components (April 2018)
The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.
18 Product News (Spring 2007)
News about upcomming products
19 Mining for Solutions (September 2016)
Increasing pressure on many fronts is compelling mine operators to thoroughly examine every phase of their operations. Fluctuating demand that whipsaws mineral prices, government-imposed environmental regulations and rising operating costs related to maintenance downtime all pose serious challenges for the mining sector. Add pressure from customers and stakeholders for more sustainable operations as well as union demands for higher wages, and you have a scenario that requires mine operators to exercise every possible option to achieve more efficient operations.
20 Minimum Design Speed Considerations for Sleevoil Bearings for Industrial Fan Applications (September 2016)
Slow speed operation of fan systems within the air handling industry is generally performed due to two reasons: a coast down operation is required for hot (induced draft) fans to cool down before shutdown (often by using a turning gear), and operational efficiency improvements can be achieved during non-peak periods by slow speed operation using a VFD. In either case, when these fans are supported by hydrodynamic bearings, it is the oil film thickness developed from the bearing-shaft interaction that limits the minimum speed that can be maintained without causing premature wear and bearing failure. This paper will present a brief overview of lubrication theory and critical design parameters to achieve slow speed operation.
21 Industry News (December 2016)
News from around the industry.
22 Engineering Showcase - Motors (June 2020)
This special advertising section features Motors manufacturers.
23 An Inside Look at Bell's EDAT System (March 2021)
Bell's Electrically Distributed Anti-Torque (EDAT) is Bell's latest commercial innovation. The EDAT system is composed of four small fans within a tail rotor shroud in an offset two-by-two pattern.
24 Industry News (June 2021)
The complete Industry News section from the June 2021 issue of Power Transmission Engineering
25 Product News (August 2021)
The complete Product News section from the July 2021 issue of Power Transmission Engineering.
26 Industry News (September 2021)
The complete Industry News section from the September 2021 issue of Power Transmission Engineering
27 Keeping Drives Electrically Quiet: Ferrites, Shielding and Grounding (October 2020)
Motion control systems often combine high power drive signals in close proximity (or even within the same cable) with lower level signals, like encoders. You will often see ferrite beads added around cables; their effectiveness in minimizing noise is greatly affected by how they are deployed. This involves which signals are grouped, what are the drive characteristics, and how shielding and grounding are handled in the system.
28 Electric Bikes - Wired for Fun (August 2020)
There is absolutely no doubt that riding an electric bicycle will not stir up cinematic memories of Marlon Brando (The Wild One) or Steve McQueen (The Great Escape) tearing it up on their hogs. Think more Pee Wee Herman and his Great Adventure.
29 Value-Driven (March 2020)
New Opportunities and Technologies Allow AC Motors to Enhance Motion Control Applications.
30 Navigating the New Normal (April 2020)
Power Transmission component suppliers discuss COVID-19 Threat and how their companies are responding to keep the supply chain connected.
31 Industry News (April 2020)
The complete Industry News section from the April 2020 issue of Power Transmission Engineering.
32 Industry News (December 2015)
News from around the industry
33 Electrical Stress and Parasitic Currents in Machine Elements of Drivetrains with Voltage Source Inverters (August 2018)
Modern drivetrains with voltage-source inverters not only offer advantages like, for example, variable speed operation, increased efficiency and higher dynamics, but also an increase in failures caused by induced parasitic currents.
34 Full Throttle (September 2014)
The Formula Renault 3.5 is seen as a crucial stepping stone on the way into the premier class, the Formula 1. Ambitious racers do not just bring their talents - they also have highly efficient motors on board to control the throttle of their 530-hp V8 engines.
35 Product News (April 2009)
The complete Product News section from the April 2009 issue of Power Transmission Engineering magazine.
36 Product News (December 2009)
The complete Product News section from the December 2009 issue of Power Transmission Engineering.
37 Reducing Electricity Cost through Use of Premium Efficiency Motors (February 2010)
motors with premium efficiency counterparts presents businesses with a significant opportunity to reduce operating costs. A comparison between premium and standard efficiency motors from 0.25 to 10 horsepower is conducted; comparisons of full-load efficiencies are shown, and estimated payback periods are calculated. Methods for calculating the yearly kilowatt-hour consumption and yearly cost savings of premium efficiency motors for this horsepower range are also given. The cost advantages of premium efficiency motors are summarized, and relevant examples of real world cost savings are shown.
38 Development of an Educational Engineering Workshop on Electric Vehicle and Motor Technology (June 2010)
This paper describes the development of an educational program centered on electric motor and electric vehicle technology at the MIT (Massachusetts Institute of Technology) Edgerton Center.
39 Product News (December 2008)
The complete product news section from the December 2008 issue of Power Transmission Engineering.
40 Product News (August 2008)
The complete product news section from the August 2008 issue of Power Transmission Engineering.
41 Industry News (December 2020)
The complete Industry News section from the December 2020 issue of Power Transmission Engineering.
42 DC Motor Protection (June 2013)
The purpose of DC motor protection is to extend a motor's lifespan by protecting it from conditions that can damage the motor's windings--both electrically and mechanically.
43 Product News (April 2008)
The complete product news section from the April 2008 issue of Power Transmission Engineering.
44 Product News (June 2008)
The complete product news section from the June 2008 issue of Power Transmission Engineering.
45 Urban Mobility--Reinventing the Wheel (December 2010)
Suggesting a bicycle is environmentally friendly is stating the obvious. But the Copenhagen Wheel, unveiled at the 2009 COP15 United Nations Climate Conference, is taking green technology and cycling in a new direction.
46 Opportunities Amidst Crises (February 2011)
Energy-challenged industries--and countries--can benefit from improved motor design and materials.
47 Product News (October 2014)
News about new Products in the industry.
48 Electric Vehicles Need Quieter Gears (October 2014)
For Mark Findlay of UK specialist driveline consultancy Drive System Design, reducing gear noise to suit the low noise levels in an electric vehicle cabin has meant throwing away the rule book.
49 Chariots to Steamboats to E-Fans (October 2014)
Heaven help Mr. Deane were he around today. In our non-stop world of transportation & transport technology, for at least the past decade it is without question the electric car that has drawn most of the attention
50 Product News (June 2015)
News about latest Products in the Industry
51 Industry News (August 2014)
The complete Industry News section from the August 2014 issue of Power Transmission Engineering.
52 Product News (August 2014)
The complete Product News section from the August 2014 issue of Power Transmission Engineering
53 Industry News (October 2013)
The complete Industry News section from the October 2013 issue of Power Transmission Engineering.
54 Should You Pay a Premium for a Mounted Ball Bearing (December 2013)
Mounted ball bearings are everywhere in industrial applications. They serve critical roles in keeping a manufacturing operation running smoothly and in ensuring that equipment functions properly and reliably. So why might it be advisable to spend significantly more for a dimensionally comparable bearing from one supplier versus another?
55 Product News (March 2014)
The complete Product News section from the March 2014 issue of Power Transmission Engineering.
56 When it Comes to Mining, Bigger is Best (June 2015)
One of the key challenges in the mining industry today is maintaining throughput in the face of ore grade quality that has declined by 40 percent in the last decade.
News Items About Mitsubishi Electric
1 Mitsubishi Electric Opens Two Factory Automation Facilities (July 14, 2017)
Mitsubishi Electric Corporation recently announced that its Mexico operations have established two new factory automation (FA) service fa...
2 EMO Preview: Mitsubishi Electric (September 21, 2017)
Mitsubishi Electric is using EMO 2017 to demonstrate innovative predictive maintenance possibilities for robots that can reduce operation...
3 SPS IPC Drives Preview: Mitsubishi Electric (November 19, 2018)
At this year's SPS IPC Drives show, November 27-29 in Nuremberg, Germany, Mitsubishi Electric will present a variety of technologie...
4 Mitsubishi Electric Offers Smart Condition Monitoring Kit (January 9, 2017)
Mitsubishi Electric offers a Smart Condition Monitoring (SCM) Kit solution that uses the latest advanced FAG SmartCheck sensors for monit...
5 Mitsubishi Electric Launches CNC Controller at SPS IPC Drives (November 29, 2016)
The new Mitsubishi Electric C80 CNC CPU unit mounts alongside an iQ-R Series PLC’s existing module, allowing nanometer scale contro...
6 Mitsubishi Electric Upgrades Inverters (October 31, 2012)
Mitsubishi Electric has upgraded the FR-F700-EC range of inverters with a number of functions that meet the specific needs of water and p...
7 Mitsubishi Electric Robot at the Cutting Edge of Cake Slicing (March 8, 2016)
When automation OEM Newtech looked to design a new ultrasonic cutting machine for the bakery industry, it turned to Mitsubishi Electric f...
8 Mitsubishi Electric Invests in Akribis Sytems in Singapore (August 8, 2019)
Mitsubishi Electric Corporation has taken an equity stake in Akribis Systems Pte Ltd (Akribis), a Singapore-based manufacturer of linea...
9 Mitsubishi Electric Automation Offers Handheld Models for GOT2000 Series HMI (February 13, 2019)
Making it easier than ever for machine operators and maintenance personnel to monitor and control machine components, Mitsubishi Electric...
10 Mitsubishi Electric Provides Control System for Underground Subway (December 23, 2019)
Mitsubishi Electric recently supported the International Tunneling Symposium organized by the Tunneling Association with a Silver Sponsor...
11 Mitsubishi Electric Releases CNC Offset Manager Software (September 9, 2021)
Mitsubishi Electric is announcing the release of its CNC Offset Manager software for remote modification of computerized numerical contro...
12 Mitsubishi Electric Introduces Articulated-Arm Robot During SPS 2019 (December 3, 2019)
Mitsubishi Electric is completing its range for robotics beginners and cost-conscious users with the MELFA RV-8CRL articulated arm model,...
13 Mitsubishi Electric and Schaeffler Collaborate on Condition Monitoring Solution (November 26, 2019)
The strengthening cooperation between Mitsubishi Electric Europe and Schaeffler is highlighted by the development of a new web-based cond...
14 Mitsubishi Electric Examines Key Trends in Pharma Automation (October 26, 2020)
The pharmaceutical sector is constantly adapting to market requirements that change frequently and quickly – just as many other ind...
15 Mitsubishi Electric Direct-Drive Motor Provides Direct Control with Accuracy of a Servo Motor (February 5, 2019)
Machine designers and end users looking for direct control of a load without traditional transmission components will be interested in th...
16 Mitsubishi Electric Offers Automation Solutions to Empower Handicap Workers (August 19, 2020)
In spite of advancing digitalization, the following still applies: Manual workstations are indispensable, because automation is not alway...
17 EMO Hannover Preview: Mitsubishi Electric (September 10, 2019)
In an increasingly competitive marketplace smarter machine tools can offer big advantages to production facilities such as increased flex...
18 Mitsubishi Electric Offers White Paper on Predictive Maintenance (December 14, 2021)
Predictive maintenance isn't the only way to combat machine downtime. Not available on all servos in the marketplace, the unique One-...
19 Mitsubishi Electric Acquires ASTES4 SA (August 17, 2018)
Based in Switzerland, ASTES4 SA (ASTES4) is engaged in the development, production and sales of patented automated sorting solutions for ...
20 Mitsubishi Electric Presents Technologies for Water Industry at IFAT 2018 (March 30, 2018)
As the water industry drives for increased efficiency in every area, completely integrated solutions that offer improvements to operati...