Faulhaber Miniature Motion Controllers

Articles About Faulhaber Miniature Motion Controllers


Articles are sorted by RELEVANCE. Sort by Date.

1 Product News (June 2021)

he complete Product News section from the June 2021 issue of Power Transmission Engineering.

2 Miniature Motion Solutions (June 2017)

Motor technology thrives in aerospace/defense applications.

3 Integrated Motion Control in Packaging Machines Delivers Value (June 2011)

Maximizing packaging machine productivity and performance is imperative to success and is driving OEMs to adopt and invest in the latest technologies that can meet their customers’ challenges. At the forefront of these performance-driven technologies is an integrated control system—or programmable automation controller (PAC)—and latest-generation motion solutions.

4 Motion Control - Product Spotlight (August 2011)

This special product news section takes a look at the latest in motion control products.

5 Product News (March 2021)

The complete Product News section from the March 2021 issue of Power Transmission Engineering

6 Honing a Competitive Advantage (December 2009)

Sunnen grows product portfolio with motion control solution from Siemens.

7 Industry News (June 2019)

The complete Industry News section from the June 2019 issue of Power Transmission Engineering.

8 Chain & Sprocket Systems and Maintenance (June 2019)

Chain and sprocket drives of one form or another have been driving machines and conveying materials for over a thousand years. The chain manufacturing industry has developed numerous types and sizes of drive chains. Although it is a mature form of power transmission, there are still many industrial applications for which drive chain is suited. It is economical, resistant to shock loads, easy to install, has the ability to transmit high torque, operates in hostile environments, and is efficient. Chain and sprocket drives are highly engineered and manufactured within close tolerances.

9 Industry News (March 2019)

The complete Industry News section from the March 2019 issue of Power Transmission Engineering.

10 Industry News (April 2019)

The complete Industry News section from the April 2019 issue of Power Transmission Engineering.

11 Get Ready, Get Set...Show (June 2019)

If you are involved in the acquisition of technology (whether your direct role is machine design, maintenance, purchasing or management), trade shows still provide one of the best ways to evaluate options, learn about the latest technology and find solutions to problems.

12 Planning Ahead (April 2019)

Navigating Clutch/Brake Operation in Harsh Environmental Conditions: Chemicals, saltwater, food particles, heat, dust, and electrical corrosion are just a few of the many issues that can cause clutches and brakes to fail prematurely.

13 Using Couplings to Reduce Downtime (August 2019)

Downtime, downtime, downtime. When it's planned, it's bearable. When it's not, it's not. To maintain machinery, planned downtime is necessary. To fix broken equipment, unplanned downtime is excruciating, especially when your factory is running closer and closer to full capacity.

14 In the News: Linear Motion (December 2019)

The following article is a round-up of the latest linear motion product and industry news items featured at www.powertransmission.com and on social media.

15 Product News (February 2020)

The complete Product News Section from the February 2020 issue of Power Transmission Engineering.

16 Motor Sizing Unusual Loads (February 2020)

One of the fun parts of the motion industry is involvement in popular movies! Motor specifications can be a bit rough: "I need to spin a 120-pound actor (and chair) 180 degrees in one-half second. He will be sitting up-right."

17 Reduce Your Linear Motion Assemblies to a Single Component with Motorized Lead Screw Actuators (December 2019)

When it comes to specifying linear motion within a machine, system designers have many options from which to choose. Making the right choice can impact the ease of installation, footprint and cost of operation.

18 Product NEws (October 2019)

The complete Product News section from the October 2019 issue of Power Transmission Engineering, featuring new technologies from Timken, Applied Motion Products, LM76, Ogura, Portescap, Ruland Manufacturing, and Heidenhain

19 Engineering Showcase - March 2019 (March 2019)

Special advertising section featuring mechatronics and motion control.

20 Product News (September 2019)

The complete Product News section from the September 2019 issue of Power Transmission Engineering.

21 Product News (August 2019)

The complete Product News section from the August 2019 issue of Power Transmission Engineering.

22 Industry News (February 2019)

The complete Industry News section from the February 2019 issue of Power Transmission Engineering.

23 Industry News (September 2018)

The complete Industry News section from the September 2018 issue of Power Transmission Engineering.

24 Product News (October 2018)

The complete Product News section from the October 2018 issue of Power Transmission Engineering.

25 Gearmotors Pulling, Pushing and Controlling Their Weight (October 2018)

Industrial mainstay adapts to remain relevant in a 4.0 world

26 Purchasing Efficiency (September 2018)

You may have noticed a lot of merger and acquisition activity lately in the power transmission industry. What does it mean?

27 Thermal Growth Issues and Solutions for Shaft Couplings (August 2018)

Many refineries and chemical plants are built with large pieces of rotating equipment in an outdoor setting exposed to the elements. The author has been researching thermal growth issues for decades across North America.

28 Making the Smart Choice in PT Components (April 2018)

The Latest Clutch & Brake Technology Looks at Reliability, Cost and Design Specifications.

29 Pushing Forward with Belts and Chains (June 2018)

The technology continues to evolve in chain- and belt-driven systems

30 Industry News (October 2018)

The complete Industry News section from the October 2018 issue of Power Transmission Engineering.

31 The ABCs of Linear Motion Rolling Guides (December 2018)

Improving System Performance One Application at a Time. PTE recently caught up with IKO, Rollon and THK to breakdown the basics in linear motion rolling guides.

32 Gears, Fluid Power and Electric (February 2019)

The American Gear Manufacturers Association has evolved its trade show. What was formerly Gear Expo is now the Motion + Power Technology Expo (MPT Expo), an event intended to represent the entire motion and power transmission supply chain. As part of the expansion of the show’s scope, AGMA has partnered with the NFPA (National Fluid Power Association) to include a fluid power pavilion and additional educational sessions.

33 Industry News (February 2020)

The complete Industry News section from the February 2020 issue of Power Transmission Engineering.

34 Realizing the High Precision Load Handling Benefits of Rodless Electromechanical Actuators (February 2019)

Electromechanical rodless linear actuators can offer better load handling in smaller spaces than rod-style actuators, but realizing those benefits requires careful attention at the specification level. Whether you are replacing a failed actuator, looking for better performance or building a new application from the ground up, success depends on how precisely you specify application requirements.

35 Product News (February 2019)

The complete Product News section from the February 2019 issue of Power Transmission Engineering.

36 Industry News (December 2018)

The complete Industry News section from the December 2018 issue of Power Transmission Engineering.

37 Introducing the Ball Screw (December 2018)

The Swiss Army Knife of PT Components.

38 In Motion (March 2019)

The following special product news section examines the latest products and technologies in motion control.

39 Smart Couplings Remove Guesswork from Measurements in Machinery Applications (March 2020)

Quite often, the collection of precise data in drive technology applications can be problematic. Data monitoring in a rotating drivetrain is difficult because a direct networking cable connection is often not an available option. Nothing sends shivers down the spine of for example, a production line manager or a system integrator like uncertainty. That's why achieving precise measurement of things like torque and other parameters in machinery applications is, while daunting, a dearly desired goal, especially if those measurements are only available at the drive and motor.

40 Animatronics (September 2021)

Animatronics covers a wide range of applications, power levels and interfaces, as well as different actuator methods.

41 Lead Screws vs. Ball Screws: Which Will Work Best for Your Application? (September 2021)

Reviewing the characteristics of lead screws vs. ball screws can help you select the right screw-driven system for your linear motion application.

42 Product News (September 2021)

The complete Product News section from the September 2021 issue of Power Transmission Engineering.

43 Product News (August 2021)

The complete Product News section from the July 2021 issue of Power Transmission Engineering.

44 Gear Manufacturing in Motion (August 2021)

Electric and fluid power has expanded the focus recently at the Motion + Power Technology Expo - September 14-16, St. Louis, Missouri - but gear manufacturing remains the core of AGMA's biennial trade show.

45 Industry News (April 2021)

The complete Industry News section from the April 2021 issue of Power Transmission Engineering.

46 Getting Ready for Normal (June 2021)

In May, Gov. Mike Parson of Missouri sat down and recorded a video on behalf of AGMA's upcoming Motion+Power Technology Expo

47 Freddie Mercury in the Show Me State (September 2021)

The Motion + Power Technology Expo takes place September 13-16 in St. Louis. It's going to be a different kind of trade show than most people have ever experienced.

48 Power Transmission Suppliers Converge at AGMA's MPT Expo (September 2021)

St. Louis plays host to the leading suppliers in mechanical power transmission, September 13-16

49 The Art of the Balance (February 2022)

Balancing impellers and rotors saves money and improves performance and safety.

50 Industry News (February 2022)

The complete Industry News section from the February 2022 issue of Power Transmission Engineering.

51 Motion Control Trending Topics 2021 (December 2021)

Digital transformation is taking place across industrial manufacturing and is most prominent in areas such as motion control, automation and robotics.

52 Stay "On-Track" When Selecting a Linear Guide System (December 2021)

Linear guide systems are perhaps the most diverse group of products in the motion control industry. Here's how to pick the best one for your application.

53 Coming Together (October 2021)

The American Gear Manufacturers Association recently held our biennial trade show, the Motion+Power Technology Expo. Although it was a smaller, quieter show than normal, it was well worthwhile for those who were able to make it.

54 Linear Motion Components Take Flight in Aerospace and Defense Industry (October 2021)

Key advantages of linear motion components in aerospace applications.

55 Turning the Corner (April 2021)

I went to pick up a pizza the other day and had a hard time finding a spot in the restaurant's lot. I was a little surprised by this, because I personally haven't eaten in a restaurant in about a year. But there were lots of people inside, eating at tables - acting almost as if life were normal.

56 Examining Functional Safety in Motion Control Applications (March 2021)

The increased complexity of components as well as the need for system integration continues to challenge machine designers today.

57 Industry News (April 2020)

The complete Industry News section from the April 2020 issue of Power Transmission Engineering.

58 Product News (June 2020)

The complete Product News section from the June 2020 issue of Power Transmission Engineering.

59 Precision Manufacturing and the Digitalization of Linear Motion Technology (June 2020)

Digitalization is increasingly transforming mechanical engineering and manufacturing technologies, bringing with it not only unparalleled control and flexibility over production systems but so much more.

60 Navigating the New Normal (April 2020)

Power Transmission component suppliers discuss COVID-19 Threat and how their companies are responding to keep the supply chain connected.

61 Value-Driven (March 2020)

New Opportunities and Technologies Allow AC Motors to Enhance Motion Control Applications.

62 12 Current Trends in Motion Control (March 2018)

Smart Factory solutions hint at machine design potential in 2018.

63 Upgrading Air-Cooled Heat Exchangers (ACHE) and Cooling Towers (June 2020)

Many industrial facilities with air-cooled heat exchangers (ACHE) and cooling towers often have older units installed. Depending on the age, repairs, and maintenance done over the years it may have had an impact on performance. Upon conducting site inspections of the equipment, it is sometimes found that ACHE or cooling tower components have degraded. This can result in a system that is not very energy-efficient and delivers substandard cooling performance.

64 Centralized vs. Decentralized: Choosing the Right Type of Motor Control System (August 2020)

Are you looking for one simple formula to help you choose between centralized and decentralized motor control? Unfortunately, such a formula does not exist. However, evaluating the overall size of the system, comparing labor and material costs, and maintaining flexibility can help guide engineers in the right direction.

65 Leveraging Stepper Motor Linear Actuator Configurability (December 2020)

When designers and integrators need simple, flexible and compact linear actuation, they often turn to stepper motor linear actuators (SMLAs). The high configurability of SMLAs is among their greatest virtues, but sorting through myriad configuration options to tailor the optimal solution for a particular application can be a challenge for even the most seasoned motion engineer.

66 Industry News (February 2021)

The complete Industry News section from the February 2021 issue of Power Transmission Engineering.

67 Bosch Rexroth Celebrates 30 Years of Linear Motion Innovations (December 2020)

Bosch Rexroth began developing linear bushings, shafts, slides, and transfer tables as prototypes in the 1960s. The first two complete linear modules with linear guides in combination with a ball screw assembly and toothed belt drive as a ready-to-install subsystem were launched in 1990 -- a quantum leap in the linear axes range which had previously been dominated by components.

68 Industry News (October 2020)

Obituary: Daniel B. Jones, plus the complete Industry News section from the October 2020 issue of Power Transmission Engineering.

69 Industry News (September 2020)

The complete Industry News section from the September 2020 issue of Power Transmission Engineering.

70 Keeping Drives Electrically Quiet: Ferrites, Shielding and Grounding (October 2020)

Motion control systems often combine high power drive signals in close proximity (or even within the same cable) with lower level signals, like encoders. You will often see ferrite beads added around cables; their effectiveness in minimizing noise is greatly affected by how they are deployed. This involves which signals are grouped, what are the drive characteristics, and how shielding and grounding are handled in the system.

71 Product News (March 2020)

The complete Product News section from the March 2020 issue of Power Transmission Engineering.

72 Fluid Couplings vs VFDs for High Inertia Rotating Driven Loads (September 2017)

As the old adage goes, "There is more than one way to skin a cat." In the early stages of any project, system designers are faced with choices; whether they are designing a new application or retrofitting an old one, they need to determine what is the most efficient, economical and practical way of completing the task at hand. Though there are usually at least two viable means to accomplish the task, the first step is always to review and weigh the merits of each option.

73 Linear Motion Q&A: Customized Machinery Built with Off-the-Shelf Components (April 2010)

This Q&A session with various experts at Thomson Linear Systems covers linear slides & stages, clutches & brakes, bearings and actuators.

74 Product News (August 2010)

The complete Product News section from the August 2010 issue of Power Transmission Engineering.

75 The Limbs of Lumenhaus (October 2010)

Motion systems bring award-winning and energy-optimizing “Smart House” to life.

76 Oscillation Welding Protects Pipelines (April 2010)

Ball screw assemblies are key to this patent-pending oilfield corrosion prevention solution.

77 Product News (April 2010)

The complete product news section from the April 2010 issue of Power Transmission Engineering.

78 Autosave Increases Productivity, Reduces Downtime for Nestle Purina (August 2009)

As automation devices have grown more complex and have incorporated more plant data in their operation, there is an increased need for programming changes to continue smooth operation or improve performance. In environments requiring frequent changes, it is not uncommon for code to be lost or changes overwritten, resulting in increased downtime and decreased productivity

79 Product News (February 2010)

The complete Product News section from the February 2010 issue of Power Transmission Engineering.

80 Product News (August 2011)

The complete Product News section from the August 2011 issue of Power Transmission Engineering

81 Best Practices for Selecting and Sizing Guide Wheels (October 2011)

How to select a guide wheel with the properties best-suited for a given application to create a system that reduces design costs and engineering changes, and lowers warranty, assembly, installation and mounting costs.

82 PTExtras (December 2012)

Take a look at some of the latest videos posted on powertransmission.com, plus the most recent updates to our online buyers guide.

83 Smart Actuators for Off-Highway (February 2013)

Smart actuators bring big benefits to utility and other off-highway vehicles

84 Industry News (October 2012)

The complete Industry News section from the October 2012 issue of Power Transmission Engineering.

85 Selecting and Sizing Ball Screw Drives (October 2012)

The ball screw drive is an assembly that converts rotary motion to linear motion and vice versa. The ball screw drive consists of a ball screw and a ball nut with recirculating ball bearings...

86 Guidelines for Designing Better Motion Control Systems (February 2012)

Motion control systems engineers work chiefly in two well-defined areas: 1) new designs and 2) redesigns or retrofits. This article examines the best approach for each option.

87 Getting Creative (October 2012)

Beverage industry conveyor pours on advantages in distribution center. Case study describes the new conveying systems at Motion Industries Canada.

88 Control System Upgrades Product Testing and Validation Machinery (December 2008)

Opto 22 Embeds Snap Motion Control subsystem in production equipment to control, monitor and gather operational data.

89 Music in Motion (December 2008)

Woodworking process gets much needed upgrade for guitar manufacturer.

90 Microprocessor-Controlled Prosthetic Leg (June 2011)

A new solution has been developed around the use of microprocessor-controlled prostheses. Just like natural limbs, these can react automatically, adapting to the current situation.

91 How To Use a Hand-Held Micrometer to Measure Miniature and Instrument Ball Bearings (December 2013)

For the most accurate measurements, miniature and instrument ball bearing dimensions should be measured with a calibrated air gauge. A good second option is a calibrated optical comparator. On occasion, it may be necessary to use a calibrated, hand-held micrometer to double-check a measurement or for simple verification while working in the field.

92 Deep-Sea Microbe Research (April 2019)

Faulhaber motors help seek climate answers in deep-sea trenches

93 Product News (June 2018)

Elastic housing deformation by MESYS, plus new motors, actuators, gear drives and more.

94 Product News (December 2010)

The complete Product News section from the December 2010 issue of Power Transmission Engineering

95 Product News (October 2017)

New HMI from Siemens, ITAMCO ramps up additive manufacturing, LM76 introduces new linear bearings, plus other new products from around the industry.

96 PT Extras (August 2013)

Gear Expo coverage, plus a new video from Motion Industries and Rexnord.

97 Medical Motion Control (August 2013)

Controls from Quicksilver help in the design and development of medical rehabilitation equipment originally designed for returning astronauts.

98 Motion System Management (August 2008)

Companies focus on customization and quality in linear motion

99 Product News (October 2008)

The complete product news section from the October 2008 issue of Power Transmission Engineering (PTE).

100 Product News (August 2008)

The complete product news section from the August 2008 issue of Power Transmission Engineering.

101 Product News (April 2008)

The complete product news section from the April 2008 issue of Power Transmission Engineering.

102 Product News (August 2013)

The complete Product News section from the August 2013 issue of Power Transmission Engineering

103 Product News (February 2008)

The complete Product News section from the February 2008 Power Transmission Engineering.

104 Ball Screws Revisited - Ask the Expert (February 2013)

A reader asks for clarification on last issue's Ask the Expert column about ball screw sizing.

105 Industry News (August 2013)

The complete Industry News section from the August 2013 issue of Power Transmission Engineering.

106 IMTS 2016 Booth Preview (August 2016)

A nose-in-the-tent peek at the booths featuring mechanical motion components.

107 Eight Reasons to Use Air Bearings Over Mechanical Bearings (December 2016)

Mechanical guiding systems, such as crossedroller bearings, work well for most motion control applications; however, when precision, angular repeatability, and geometric performance (runout, straightness) are critical or where submicron bearing rumble is problematic, air bearings are recommended. An air-bearing stage is a rotary or linear positioner that floats on a cushion of air, using one of several preload mechanisms, nearly eliminating mechanical contact and thus wear, friction, and hysteresis effects. Here are eight reasons why an air-bearing stage might be the right choice for your application:

108 Now That Is Smart Manufacturing! (February 2017)

A machine called Sub1 Reloaded solved a Rubik's Cube in 637 thousandths of a second in Munich.

109 Industry News (April 2016)

News from around the Industry.

110 Product News (March 2016)

News about the latest Products

111 Product News (December 2015)

News about latest products

112 Product News (Spring 2007)

News about upcomming products

113 Product News (March 2017)

The complete Product News section from the March 2017 issue of Power Transmission Engineering.

114 Industry News (March 2017)

The complete Industry News section from the March 2017 issue of Power Transmission Engineering.

115 CNC System Upgrades (December 2017)

Automated production of large objects such as auto body prototypes, boat hulls and surfboards traditionally requires computerized numerical control (CNC) systems costing nearly a million dollars. Thomson Cuts Costs and Production Time for Autoscale Inc.

116 Industry News (February 2018)

The latest new hires and corporate announcements from around the industry.

117 Motors and Mechatronics - Moving to a Higher Plane (September 2017)

This is an article about motors - preventive motor maintenance, actually. And something else - mechatronics. In today's high-tech manufacturing and industrial use environments, it is near impossible to talk about equally complex motor maintenance and repair-or-replace protocols without it.

118 MediaMation Utilizes Digitization and Pneumatics to Alter Theater Experience (August 2017)

"For your safety, please keep your hands, arms and legs inside the vehicle at all times."

119 Product News (August 2017)

The latest tools and techologies in power transmission, motion control and related components.

120 Industry News (August 2017)

Schaeffler invests in North America, plus other news from around the industry.

121 PRODUCT NEWS (October 2015)

All about new Products

122 Industry News (September 2015)

News From Around the Gear Industry

123 Value Added at MDA, IANA and IMTS (September 2014)

What was once targeted specifically toward the machine tool and metalworking industries, IMTS 2014 in Chicago spent a great deal of time and resources on automation, controls, mechanical components, self-diagnostics and an increase in productivity on the shop floor.

124 Industry News (February 2015)

News from around the Industry

125 Wall to Wall Technology (August 2014)

With the addition of Industrial Automation North America (IANA) as well as Motion, Drive & Automation North America(MDA NA), IMTS 2014 has greatly expanded its range of manufacturing technology services. These co-located shows complement the metalworking solutions found at IMTS by bringing in key suppliers from around the world.

126 Under Pressure (June 2014)

Wichita Clutch helps drive storm simulator at the University of Florida.

127 The Efficient Drive System (December 2013)

It's a fact that drive systems wouldn't function properly or efficiently without couplings. They quietly go about their business of transferring motion from one drive element to the next. In the PT market today, couplings have the unique challenge of satisfying a variety of customer needs including tighter tolerances, higher speeds and a more versatile selection process.

128 Inexpensive Methods to Measure the Performance Characteristics of a Linear Motion Device (December 2013)

This article describes a series of tests that can be performed by the average user, with little experience, and without sophisticated measuring instruments, to quickly determine the most important performance characteristics of linear motion systems.

129 Product News (March 2015)

New products within the Industry

130 Diagnosing the Health of Medical Motors (March 2015)

John Morehead, national sales manager of Crouzet Motors (Vista, CA), was bunkered down in his office in Palatine, IL surrounded at all points by ankle-deep snow from an unfortunately terrible Chicago’s winter night.

131 Product News (June 2015)

News about latest Products in the Industry

132 Product News (August 2015)

News about the latest Products from the Industry

133 Industry news (April 2015)

News From Around the Industry

134 Product News (April 2015)

Latest Products

135 The Future Rests on the River Leine (March 2015)

“[Motion, Drive & Automation] at Hannover Messe is the place where the future is determined.”

136 INDUSTRY NEWS (March 2015)

News From the Industry

137 Smarter Machines Need Smarter Components (March 2018)

The future of motion control is connectivity. Read this issue to learn why.