Archive > 2016 > December 2016 > Timing Belts and Pulleys - Operations

Timing Belts and Pulleys - Operations - December 2016


The article "Timing Belts and Pulleys - Operations" appeared in the December 2016 issue of Power Transmission Engineering.

Synchronous drives are especially well-suited for low-speed, high-torque applications. Their positive driving nature prevents potential slippage associated with V-belt drives, and even allows significantly greater torque carrying capability. Small pitch synchronous drives operating at speeds of 50 ft/min (0.25 m/s) or less are considered to be low-speed. Care should be taken in the drive selection process as stall and peak torques can sometimes be very high. While intermittent peak torques can often be carried by synchronous drives without special considerations, high cyclic peak torque loading should be carefully reviewed.

timing belts, pulleys, synchronous belts, belt drives, timing pulleys, synchronous drives, SDP/SI, Gates

The article "Timing Belts and Pulleys - Operations" should appear in the box below, but if you do not see it, you can download it here.

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.